Stainless Steel Shelving

Stainless Steel Shelving

Our Stainless Stell wall shelves are supplied with pre-drilled “L-shaped” box section support brackets and are available in various sizes & Tiers as per the table below (with increments of 300mm as standard). Additional support brackets are provided as required depending on the shelf length selected.
The wall shelf can be supplied in three depths either 300, 400 or 500 mm deep. Custom Made Wall Shelves are available on demand.

Overall LengthSingle Shelf
Ref code
Double Shelf
Ref code
Triple Shelf
Ref code
600mm15/600S15/600D15/600T
900mm15/900S15/900D15/900T
1200mm15/1200S15/1200D15/1200T
1500mm15/1500S15/1500D15/1500T
1800mm15/1800S15/1800D15/1800T
2100mm15/2100S15/2100D15/2100T
2400mm15/2400S15/2400D15/2400T
2700mm15/2700S15/2700D15/2700T

Pot Shelving

Heavy duty pot Shelf for the storage & drainage of pots, pans and cooking utensils, the shelf is generally positioned over a sink unit within the kitchen.
The shelf is constructed of a welded 430 grade material with 1.2mm thick 30 mm box section outer frame and integral wall bracket legs.
Within the frame, a series of 12 mm diameter round bars run end to end, forming the shelf storage space. The Pot Shelf is available in a variety of lengths and widths. The integral cantilever wall brackets are pre-drilled for final fixing. Custom Made Pot Shelving is available on demand.

For a Free Quote or Further Details on any of our Bespoke Steel Fabrication Services & Products Contact Grant Stainless Steel

Combi Stand – Single or Double Racks

Single Rack Combi Stand

Double Rack Combi Stand

Combi Stands/Racks.

Our range of welded construction Combi stands can be mounted on adjustable feet or castors and are available in either single or double rack systems to suit various oven sizes as per clients specification and produced from 30 mm x 30 mm box frames.

Reference No.Length mmWidth mmNo. of TiersPrice
12/10TierCustomised Tray Size to suitCustomised Tray Size to suit10
12/12TierCustomised Tray Size to suitCustomised Tray Size to suit12
12/24TierCustomised Tray Size to suitCustomised Tray Size to suit24

Microwave/Salandar Heavy Duty Shelf

Our heavy duty microwave/Salandar shelf is 600 mm long as standard and available either 450 or 600 mm deep. The shelf is manufactured from 1.2 mm thick 430 grade material and is mounted on cantilever type welded 430 grade, 1.2mm thick, 30 mm box section wall brackets, pre-drilled for site fixing.
The shelf is additionally strengthened with turn down 32 mm edges and a rear up stand of 30 mm. The electrical cable of the microwave can then pass behind the shelf up stand when in situ.

Heavy Duty Stainless Steel Crockery Storage Rack

Our Heavy Duty Stainless Steel Crockery Tiered Storage Rack is ideal for many types of kitchen equipment storage, from utensils to containers. All our storage rack shelving is manufactured from sturdy 430 grade 1.2 thick. s/steel, supported on fully welded 430 grade 1.2 thick. 30mm s/steel box framing.
Each rack is supplied with adjustable height flanged feet for securing to a finished floor surface, alternatively castors can be fitted to allow to move the units. Storage rack shelving can be produced as either solid stainless steel construction or as a perforated surface.
The Crockery units are available in two heights, 1500 mm & 1800 mm high – 1500 mm height racks have 3 tiers of shelving, 1800 mm high racks have 4 tiers of shelving.
The solid shelf rack is available in 1200, 1500, 1800 & 2100 mm lengths, with standard depth of 540 mm.

  • Commercial s/steel 3 or 4 tiered shelf racking.
  • Fully welded construction with 430 gd 1.2 thk. 30mm s/steel box framing.
  • Frame fitted with adjustable height flanged feet for securing to a finished floor surface
  • Available in two heights, 1500 mm & 1800 mm high.
  • 1500 mm height racks have 3 tiers of shelving.
  • 1800 mm high racks have 4 tiers of shelving.
  • Standard rack depth 540 mm.
  • Perforated shelf rack is available in 900, 1200, 1500, 1800 & 2100 mm lengths.